| |
-
overview
 CAN Bus
The Controller Area Network (CAN) specification defines the Data Link Layer, ISO 11898 defines the Physical Layer.
The CAN bus [CANbus] is a Balanced (differential) 2-wire interface running over either a Shielded Twisted Pair (STP), Un-shielded Twisted Pair (UTP), or Ribbon cable.
Each node uses a Male 9-pin D connector.
The Bit Encoding used is: Non Return to Zero (NRZ) encoding (with bit-stuffing) for data communication on a...
preview:
http://www.interfacebus.com/Design_Connector_CAN.html
5/21/2007
Tags: can
 |
