Free News Alerts by Keyword
Interested in embedded technology? Are you an engineer or designer? e-clips helps you follow the latest news on key topics like multicore, FPGAs, 8051, ESL, PC/104 and more!
| |
-
organization
-
IDEMA
IDEMA provides an array of benefits that includes exposure to the targeted audience that is the global disk drive industry through a wide variety of affordable, high-impact sponsorship and networking opportunities as well as substantial discounts on industry events.
IDEMA’s International Standards program sets cutting edge industry standards, and IDEMA members have exclusive voting privileges.IDEMA’s on-line publication, INSIGHT, and the association web site, which serves as one of the industry’s most used resources, has positioned IDEMA as the unified voice of the global disk drive industry.
preview:
http://www.idema.org
|
-
organization
-
Storage System Standards Working Group
The SSSWG works to model generic mass storage systems, and based on such a model, to develop widely accepted standards which are readily implemented.
It is the intent of the SSSWG to develop standards which: are timely; result in interoperable systems; allow system implementation with minimal licensing requirements; result in a ubiquity of systems based on the standards; promote use of the best current technologies;
preview:
http://www.ssswg.org
|
-
organization
-
Technical Committee T10
This is the place to find more information about I/O Interfaces, especially SCSI, SCSI-2, and SCSI-3 including SPI-2 (Fast-40 or Ultra2 SCSI), Low Voltage Differential (LVD), SPI-3 (Ultra3 SCSI or Ultra160), SPI-4 (Ultra320), SPI-5 (Ultra640), Serial Attached SCSI (SAS), and much more.
There are also pointers here to other web sites on Fibre Channel, ATA (IDE), and ATAPI.
preview:
http://www.t10.org
|
-
organization
-
The Serial ATA International Organization (SATA-IO)
Serial ATA is an evolutionary replacement for the Parallel ATA physical storage interface.
The Serial ATA International Organization (SATA-IO) is the group responsible for developing, managing and driving adoption of the Serial ATA specifications.
Users of the Serial ATA interface benefit from greater speed, simpler upgradeable storage devices and easier configuration.
preview:
http://www.sata-io.org
|
-
webinar
-
How to Avoid Pitfalls When Evaluating SSD Performance
Performance is always one of the top three criteria used when evaluating storage options for any application.
Due to the large number of parameters that impact performance, highly simplified, vendor-published measurements are generally representative of the best-case scenario and provide limited information on how well a storage product will perform in a particular application.
As experienced SSD users realize, the parameters that...
preview:
https://event.on24.com
date: 2/25/2009
|
-
webinar
-
SATA & SAS 6Gb/s Physical and Protocol Layers Complete Test Solutions
The Serial ATA International Organizations (SATA-IO) and Serial Attached SCSI (SAS) T10 standard committees have both released specifications to provide support for 6 Gb/s data transfer between hosts, devices, port multipliers and expanders.
At higher data rates, power consumption and emissions become more of a concern on system budgets and physical layer compliance.
Link designers seek to find optimum voltages, emphasis levels and edge...
preview:
http://www.techonline.com
date: 2/24/2010
|
-
webinar
-
Serial ATA Revision 3.0 PHY Testing Challenges: Verify your 6Gbps design to the specification
Serial ATA is the primary storage I/O interface used in all computing systems today, and is quickly gaining share in enterprise data storage and embedded data file applications for consumer electronics.
As with any high-speed serial interconnect, interoperability of components relies on the integrity of the physical layer performance characteristics such as jitter, amplitude, common mode voltage and state machine timing execution.
Agilent...
preview:
http://www.techonline.com
date: 5/13/2009
|
 |
