Save 70% on Blackfin Processor Development Tools
For a limited time, March 1 - May 28, ADI is offering two discounted development tools bundles including full VisualDSP++ Development Software and an Emulator. So order your bundle today!
Fast-UXGA Frame Grabber Series
The Fast-UXGA frame grabber series is for users who anticipate a demand for extreme I/O requirements or higher bandwidth, complex image processing and real-time fast storage in a cost effective platform.
The base Fast-UXGA, is a raw-length PCI board with two (four-mixed) UXGA analog conversion channels using Analog Device's AD9888.
The front end data is formatted and preprocessed by a FPGA before being sent to the memory subsection, processor, GigE interfaces or other outputs.
Finally, the Fast-UXGA interfaces to the host computer through a PCI-X or 4x PCIe interface for state-of-the-art data acquisition.
Options include the addition of multiple (8) Serial ATA (SATA) 150 MB/sec interfaces for continuous high-speed data storage without the usual OS or host bus transfer delays.
preview:
http://www.alacron.com
sbc
Fast-X-PCIe PCI Express Boards
The base Fast-X, is a one-half raw-length PCI board with four GigE ports and/or three basic 85 MHz Camera Link Channels and more which provide input for the newest cameras as well as a header for adaptation of other high speed interfaces.
The Fast-Xe frame grabber series is for users who anticipate a demand for extreme I/O requirements or higher bandwidth, complex image processing and real-time fast storage in a cost effective platform.
The base Fast-X, is a one-half raw-length PCI board with four GigE ports and/or three basic 85 MHz Camera Link Channels and more which provide input for the newest cameras as well as a header for adaptation of other high speed interfaces.
preview:
http://www.alacron.com
sbc
FastFrame-CB PCMCIA Board
Alacron introduces the FastFrame-CB. Available in both analog, digital and camera link configurations for greater flexibility and cost savings.
The FastFrame-CB uses the Nexperia (formerly TriMedia) PNX1302 microprocessor from Philips Semiconductors.
preview:
http://www.alacron.com
sbc
FastImage 1303 PCI Board
FastImage1303 is an Autonomous Imaging System (AIS) that offers a balanced architecture of flexible I/O and processing power with computational and memory bandwidth, typically required by demanding, real-time imaging, vision, and DSP applications.
And FastImage1303 is based on the TriMedia TM1302 microprocessor from Philips Semiconductors.
preview:
http://www.alacron.com
paper
Implementing Automatic Controls Using Data Acquisition Processor Boards
Though Data Acquisition Processor (DAP) boards are primarily data acquisition devices, the onboard processing power that makes rapid service to data conversion and buffering devices possible can also be applied for rapid service to external control processes.
There are certain limitations, but for systems that can stay within these limitations, Data Acquisition Processors provide a reliable platform for the implementation of control...
preview:
http://www.mstarlabs.com
paper
Introduction to Data Acquisition Systems and LabVIEW
The combination of a DAQ board and LabVIEW software makes a virtual instrument or a vi. A vi can perform like an instrument and is programmable by the software with the advantage of flexibility of logging the data that is being measured.
preview:
http://www.ee.upenn.edu
VersaLogic Corp.
is proud to announce the Ocelot, a small, fanless single board computer (SBC) featuring great performance, very low power operation, and the new SUMIT™ (Stackable Unified Module Interconnect Technology) expansion interface.
The Ocelot takes advantage of all the best features of Intel's latest generation Atom processor (Z5xx series), which was designed specifically for embedded applications - very high performance(up to 1.6 GHz), radically reduced power requirements, and ground-breaking power management capabilities, extended temperature operation...
