login to eCLIPS or find out about eCLIPS
Innovative Integration
Industry standard COM Express CPU module and dual XMC modules
home - www.eg3.com
 
Free Webinar - Getting started with the ARM(R) Cortex-M0(TM) Processor - Jump Start from CAST
home > industrial computing > can > tutorials
FPGA's 101 - Amazing New FPGA in Embedded Book

Innovative Integration
Innovative Integration provides board-level hardware products that integrate the best analog I/O and reconfigurable FPGAs to provide cost-effective solutions for challenging data acquisition and signal processing applications.
Innovative Integration

 

 

tutorial   1-5 star rating for this site  
Learn the Basics of CAN
With the National Instruments CAN interfaces, you can use your PC or PXI system to make automated measurements in automotive, medical, and embedded applications. This is an introductory tutorial from a leading vendor.
Click here to preview in another window preview: http://sine.ni.com   |

tutorial   1-5 star rating for this site  
CAN - a brief tutorial
The CAN bus (Controller Area Networking) was defined in the late 1980 by Bosch, initially for use in automotive applications. It has the following characteristics: Uses a single terminated twisted pair cable Is multi master Maximum Signal frequency used is 1 Mbit/sec Length is typically 40M at 1Mbit/sec up to 10KM at 5Kbits/sec Has high reliability with extensive error checking Typical maximum data rate achievable is...
Click here to preview in another window preview: http://www.computer-solutions.co.uk   |





tutorial   1-5 star rating for this site  
CAN bus Communication
This technical tutorial covers the basics of the ISO 11898 Controller Area Network protocol, common terminology, and tools for quick network development. This tutorial also covers CAN bus communication with National Instruments LabVIEW or text based programming languages and discusses hardware synchronization for simultaneous analog and CAN measurements.
Click here to preview in another window preview: https://sine.ni.com   |

tutorial   1-5 star rating for this site  
Case Study 'XCP-on-FlexRay at Audi'
The Challenge: Direct parameterization of several thousand ECU parameters via an AUTOSAR FlexRay stack The Solution: Customization and extension of CANape and XCP software components The Advantages: A calibration tool and perfectly coordinated high-performance XCP software modules from a single source
Click here to preview in another window preview: http://www.vector-cantech.com   |

tutorial   1-5 star rating for this site  
On-line Training Class - MicroCANopen
This class introduces MicroCANopen. It includes: * An Introduction to MicroCANopen including CANopen terminology * Comparison between MicroCANopen and CANopen * Limitations and optimizations of MicroCANopen * Object Dictionary, PDOs * etc.
Click here to preview in another window preview: http://www.esacademy.com   |

Innovative Integration


Innovative Integration provides board-level hardware products that integrate the best analog I/O and reconfigurable FPGAs to provide cost-effective solutions for challenging data acquisition and signal processing applications.
Innovative Integration


 

 

eg3.com 'meta' info - site map, keywords, how to contact us . . .