Innovative Integration
Innovative Integration provides board-level hardware products that integrate the best analog I/O and reconfigurable FPGAs to provide cost-effective solutions for challenging data acquisition and signal processing applications.

Free Embedded Systems
News by Keyword
Cool, free stuff!

paper    

IEEE 1588 Power Point Presentation
Well, a picture is worth a thousand words, or so they say. com IEEE-1588 Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems. Overview Objectives of 1588 A bit of history Where is it being used? Comparison with other protocols What the 1588 standard defines Technical overview •Prototype results
preview: http://www.ewh.ieee.org   date: 1/1/2003 |

paper    

Introduction to Distributed Clock Synchronization and the IEEE 1588 Precision Time Protocol
Measurement and automation systems involving multiple devices often require accurate timing in order to facilitate event synchronization and data correlation. For example, an industrial automation application may need to synchronize distributed motion controllers, or a test and measurement application may need to correlate data acquired from sensors distributed across a device under test. To achieve this synchronization, devices in the...
preview: http://zone.ni.com   |

paper    

Special Focus: Understanding the IEEE 1588 Precision Time Protocol
Measurement and automation applications often must precisely synchronize events over a widely distributed system. For example, an industrial automation system may need to synchronize distributed motion controllers, or a test and measurement system may need to measure strain gages distributed over the wing span of an airplane. The IEEE 1588 precision time protocol (PTP) provides a standard method to synchronize devices on a network with...
preview: http://zone.ni.com   date: 2/1/2007 |

organization    

IEEE 1588 at NIST
IEEE 1588TM-2002 Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems Sponsored by the Technical Committee on Sensor Technology TC-9 IEEE Instrumentation and Measurement Society - ISPCS-2008, Ann Arbor Michigan, USA
preview: http://ieee1588.nist.gov   |

organization    

PTPd
The PTP daemon (PTPd) implements the Precision Time protocol (PTP) as defined by the IEEE 1588 standard. PTP was developed to provide very precise time coordination of LAN connected computers. PTPd is a complete implementation of the IEEE 1588 specification for a standard (non-boundary) clock. PTPd has been tested with and is known to work properly with other IEEE 1588 implementations. The source code for PTPd is freely available under a...
preview: http://ptpd.sourceforge.net   |

tutorial    

IEEE 1588 - Precise Time Synchronization as the Basis for Real Time Applications in Automation
More and more data can be transferred and processed in shorter and shorter time. This trend is observed in automation technology. Because of this, Ethernet has been chosen as the transport technology for the foreseeable future. Beside speed of transmission and ease of setup, the words “real time” have a special meaning in this field. A substantial facet is precise time synchronization of different end devices. With the Precision Time...
preview: http://www.ieee1588.com   |

tutorial    

IEEE 1588 Unplugged - An introduction to IEEE 1588
IEEE 1588 provides fault tolerant synchronization for different clocks along the same network. There is very little bandwidth consumption, processing power, and setup. IEEE 1588 accomplishes all of this by using the precision time protocol, or PTP. The time protocol synchronizes all clocks within a network by adjusting clocks to the highest quality clock. IEEE 1588 defines value ranges for the standard set of clock characteristics. The Best...
preview: http://www.rtaautomation.com   |