Free News Alerts by Keyword
Interested in embedded technology? Are you an engineer or designer? e-clips helps you follow the latest news on key topics like multicore, FPGAs, 8051, ESL, PC/104 and more!

e-clips news alerts by keyword

	Microchip Announces World’s First Ionization Smoke-Detector IC With Programmable Calibration… | Microchip Integrates Sub-GHz Wireless Transmitter With 8-bit PIC® MCU to Simplify Secure… . . . last week's e-clips alert for msp430
sponsor: Blackfin® Embedded / DSP Processor

best websites for msp430:

newsgroups, evals, projects (6 records)
overviews, resources, rtos... (5 records)
seminars, blogs, portals... (7 records)
books, personal pages (7 records)

top ten, free stuff, & vendors for msp430:

e-clips "eReport: " best websites for msp430
demos, shareware & freeware for msp430
msp430 vendor guide
msp430 services guide

Express Logic develops, markets and supports the ThreadX® real-time operating system (RTOS), NetX™ TCP/IP networking stack, USBX™ USB stack, and FileX® embedded file system, and PrismX™ GUI toolkit for embedded applications. ThreadX is a royalty-free, full source code, small-footprint, low-overhead RTOS that is extremely easy to learn and use. ThreadX is one of the most widely deployed RTOS products in the world, with over 800 million products based on ThreadX.

Definition: The MSP430 is a microcontroller family from Texas Instruments. Built around a 16-bit CPU, the MSP430 is designed for low cost, low power consumption embedded applications. The architecture is reminiscent of the DEC PDP-11. The MSP430 is particularly well suited for wireless RF or battery powered applications. The device comes in a variety of configurations featuring the usual peripherals: internal oscillator, timer including PWM, watchdog, USART, SPI, I2C, 10/12/14/16-bit ADCs, and brownout reset circuitry. Some less usual peripheral options include comparators (that can be used with the timers to do simple ADC), on-chip op-amps for signal conditioning, 12-bit DAC, LCD driver, hardware multiplier, and DMA for ADC results. Apart from some older EPROM (PMS430E3xx) and high volume mask ROM (MSP430Cxxx) versions, all of the devices are in-system programmable via JTAG or a built in bootstrap loader (BSL) using RS-232. The MSP430 is a popular choice for low powered measurement devices. The current drawn in idle mode can be less than 1 microamp. The top CPU speed is 16 MHz. It can be throttled back for lower power consumption. Note that MHz is not equivalent to MIPS, and there are more efficient architectures that obtain higher MIPS rates at lower CPU clock frequencies, which can result in lower dynamic power consumption for an equivalent amount of processing. Source: Wikipedia ( http://en.wikipedia.org/wiki/MSP430)