Save 70% on Blackfin Processor Development Tools
For a limited time, March 1 - May 28, ADI is offering two discounted development tools bundles including full VisualDSP++ Development Software and an Emulator. So order your bundle today!

e-clips news alerts by keyword

new product    

Magma Unveils Tekton -- First Static Timing Analysis Solution to Deliver Fast …
Magma® Design Automation Inc. (Nasdaq:LAVA), a provider of chip design software, today unveiled Tekton™, a new timing analysis platform that offers significantly higher capacity and dramatically faster runtimes than traditional tools, without sacrificing accuracy. Unlike other solutions, Tekton runs multi-scenario analysis efficiently on low-cost hardware without requiring a large number of expensive servers and software licenses. Leveraging...
preview: http://investor.magma-da.com   date: 3/18/2010

new product    

Magma Announces FineSim Fast Monte Carlo -- New Method for Statistical …
Magma® Design Automation Inc. (Nasdaq:LAVA), a provider of chip design software, today announced the availability of FineSim™ Fast Monte Carlo, a revolutionary new alternative to traditional Monte Carlo analysis. FineSim Fast Monte Carlo makes it possible to achieve much more accurate statistical analysis as much as 100 times faster than traditional Monte Carlo methods. Most engineers today rely heavily on statistical methods such as...
preview: http://investor.magma-da.com   date: 3/18/2010

news release    

Mentor Graphics to Extend Cooperation with STMicroelectronics for Advanced…
Mentor Graphics Corp. (NASDAQ: MENT), a leader in electronic design automation, and STMicroelectronics (NYSE: STM) one of the world’s leading semiconductor suppliers, today announced a broad-scoped collaboration to develop advanced design solutions at the 32-nm technology node and down to 20-nm node. The three-year joint-development project, named DeCADE, seeks to build on advanced design solutions for SoC (System On Chip) development...
preview: http://www.st.com   date: 3/17/2010

news release    

Mentor Graphics to Extend Cooperation with STMicroelectronics for Advanced Chip-Development…
Mentor Graphics Corp. (NASDAQ: MENT), a leader in electronic design automation, and STMicroelectronics (NYSE: STM,) one of the world’s leading semiconductor suppliers, today announced a broad-scoped collaboration to develop advanced design solutions at the 32-nm technology node and down to 20-nm node. The three-year joint-development project, named DeCADE, seeks to build on advanced design solutions for SoC (System On Chip) development...
preview: http://www.mentor.com   date: 3/16/2010

new product    

Synopsys Galaxy Custom Designer Accelerates Analog/Mixed-Signal Engineering …
Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP for semiconductor design, verification and manufacturing, today announced that it has enhanced its Galaxy Custom Designer™ solution with the addition of SmartDRD, an innovative design-rules-driven technology. SmartDRD technology enables layout engineers to more quickly achieve design-rule-check (DRC) clean designs with significantly reduced effort for analog and custom designs....
preview: http://synopsys.mediaroom.com   date: 3/12/2010

new product    

Mentor Graphics Adds AMBA 4 Verification IP to the Questa Multi-view Verification Components Library
Mentor Graphics Corporation (NASDAQ: MENT) today announced that the quickly-growing library of Questa® Multi-view Verification Components (MVCs) has been expanded to support phase one of the AMBA® 4 specification, recently announced by ARM. Phase one of the AMBA 4 specification includes AMBA 4 AXI, AXI-Stream and AXI-Lite interfaces, allowing increased functionality and efficiency for complex, media-rich, on-chip communication. The Questa...
preview: http://www.mentor.com   date: 3/12/2010

more 1   2