Innovative Integration
Innovative Integration provides board-level hardware products that integrate the best analog I/O and reconfigurable FPGAs to provide cost-effective solutions for challenging data acquisition and signal processing applications.

Free Embedded Systems
News by Keyword
Cool, free stuff!

webinar    

Tips and Tricks for High Speed Printed Circuit Board Design
Printed circuit board (PCB) layout is one of the last steps in the design process and quite often not given the attention it deserves. At high speeds circuit performance is heavily dependent upon board layout. John shares with you some of the tips and tricks regarding high speed printed circuit board design he has picked up over the last 30 years. These range from power supply bypassing to crosstalk, the topics discussed here are at a...
preview: http://www.eetimes.com   date: 9/15/2010 |

webinar    

Uncovering the Hidden Impairments in Advanced RADAR Systems
Modern radar systems working in environments with strong clutter, noise and jamming must use advanced digital signal processing techniques. Direct analysis techniques often fail for designing such complex systems. Although simulation is often used, most simulation tools do not have enough models, especially RF models, and integration capability for this case. In this paper, a system design methodology is proposed using SystemVue (SV)....
preview: http://www.techonline.com   date: 4/14/2010 |

webinar    

Using FPGAs to Embed Test Instruments into Your PCB Design
This FREE Webinar will show you how you can embed virtual test instruments inside an FPGA device to assist with product development, system test and field diagnosis. Get a window into your hardware internals with control and data visibility like never before. Who should attend: System design engineers Hardware designers Test engineers Production engineers Prototype engineers What you'll learn: You don't need any...
preview: http://www.pcbshows.com   date: 9/22/2009 |

webinar    

VPX, VME, REDI Technology
One of the benefits of VPX is lots of pins and possibilities - but it's also a drawback, because there are almost too many choices. Toss in legacy VME boards and it gets even more interesting. Add in further options for slot pitch, cooling options, and ESD control with REDI, and the choices for packaging get numerous as well. How do designers navigate the field of choices and get backplanes, system packaging, single board computers, and I/O...
preview: https://event.on24.com   date: 11/5/2009 |

webinar    

VPX, VME, REDI Technology
One of the benefits of VPX is lots of pins and possibilities - but it's also a drawback, because there are almost too many choices. Toss in legacy VME boards and it gets even more interesting. Add in further options for slot pitch, cooling options, and ESD control with REDI, and the choices for packaging get numerous as well. How do designers navigate the field of choices and get backplanes, system packaging, single board computers, and I/O...
preview: https://event.on24.com   date: 11/5/2009 |

webinar    

Why Mil/Aero PC104 Applications are Making the Move to COM Express
The need to increase performance on a number of fronts - compute, I/O and graphics - is making it harder for Mil/Aero system designers to satisfy these requirements with PC/104-based boards. The PC/104-Express and related PC104 standards use a complicated stack-up methodology that increases complexity, takes up more space and adds cost, especially when deploying the latest processors required for higher performance applications. COM...
preview: https://event.on24.com   date: 9/30/2010 |

more 1   2   3   4   5   6   7   8   9   10   11