Innovative Integration
Innovative Integration provides board-level hardware products that integrate the best analog I/O and reconfigurable FPGAs to provide cost-effective solutions for challenging data acquisition and signal processing applications.
| |
-
paper
-
Four Common RoHS Concerns Relating to PCB Assembly
You need to consider the following four key areas when readying a project for assembly in a lead-free / RoHS compliant environment: Base Circuit Board: Industry research has found that the substrate and board finish used on lead-free boards may need to be different than for circuit boards using lead.
If sending us (or any assembly house) a kit, make sure to have your boards fabbed for lead-free / RoHS compliance.
It's not just the...
preview:
http://www.screamingcircuits.com
|
-
paper
-
How to Create a Printed Circuit Board (PCB)
This application note outlines a process through which printed circuit boards (PCBs) may be produced using the PCB design and fabrication tools available in the Electrical and Computer Engineering Department at Michigan State University.
This document describes the PCB production process in general and also presents a case study.
preview:
http://www.egr.msu.edu
date: 4/6/2000
|
-
paper
-
Kozio Technical White Papers
White Papers One Button Test Strategy for Volume Manufacturing View Abstract | Implement a one button PASS/FAIL circuit board test strategy in a single day! Kozio’s hardware validation test suite provides an integrated and automated solution delivering at-speed functional test running on the device under test (DUT) coupled with powerful test management software.
The latest kDiagnostics™ Manufacturing Suite offering from Kozio allows...
preview:
http://www.kozio.com
|
-
podcast
-
Innovative PCB (Printed Circuit Board) Prototyping and Embedded Board Technologies
Neal Greenberg, Vice President of Sales & Marketing, and co-founder of SchmartBoard, speaks with eg3.com about the company's innovative Electronic Circuit Building Blocks and 'EZ' Technology.
The company's technology makes the soldering of surface mount components and circuit creation accessible to virtually anyone, and is particularly relevant to engineers looking for PCB prototyping and manufacturing services as well as engineers using...
preview:
http://www.eg3.com
date: 7/21/2009
|
-
podcast
-
Mentor Graphics EDA Training and Employment Resources for Unemployed Designers
Recently unemployed? Concerned about your EDA technical training? Christine Egli and Tom Floodeen of Mentor Graphics discuss how the company is reaching out to the EDA community to offer technical training in EDA (Electronic Design Automation) to 'displaced workers.' For those who qualify, the program is an excellent way to beef up your technical skills as well as to network with other EDA professionals seeking employment opportunities.
preview:
http://www.eg3.com
date: 3/24/2009
|
-
podcast
-
Mentor Graphics PADS 9.0 - Advanced PCB Design
Jim Martens and John Isaac of Mentor Graphics discuss PADS 9.0 for advanced PCB design.
This significantly-enhanced release of the PADS flow adds new levels of functionality, scalability and integration, enabling designers to leverage many of Mentor's unique and innovative technologies for design, analysis, manufacturing and multi-disciplined collaboration.
With the scalable PADS 9.0 flow users can cost-effectively design their...
preview:
http://www.eg3.com
date: 8/11/2009
|
 |
